Table of Contents
Advertisement
Radar-Assisted Event Enforcement Traffic Camera User Manual
needed.
Steps
1. Go to Configuration → Device Configuration → System → 802.1x.
2. Check Enable EEE 802.1X.
3. Select Protocol Type and EAPOL Version.
Protocol Type
If you use EAP-MD5, the authentication server must be configured. Register a user name and
password for 802.1X in the server in advance. Enter the user name and password for
authentication.
EAPOL Version
The EAPOL version must be identical with that of the router or the switch.
4. Enter User Name and Password registered in the server.
5. Confirm the password.
6. Click Save.
8.5 Set Image and Video Library
Set the interaction parameters of the device consistent with those of the image and video library
platform via the image and video library (1400) protocol, and register the device on the platform.
When the device generates alarm signals, the alarm information will be sent to the platform.
Steps
Note
The function varies with different models. The actual device prevails.
1. Go to Configuration → Device Configuration → System → Image and Video Library.
2. Check Enable.
3. Set the parameters such as the device ID, user name, password, etc.
Figure 8-4 Set IEEE 802.1X
50
Advertisement
Table of Contents
