Debug; Enable Information Overlay; Set Capture Filtering - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual
function.
Steps
1. Go to Configuration → Device Configuration → System → DST.
2. Check Enable DST.
3. Set Start Time, End Time, and DST Bias.
4. Click Save.

12.8 Debug

Note
The debug configurations below are only provided to debug the device by the professionals.

12.8.1 Enable Information Overlay

You can overlay the algorithm POS information and positioning frames on the captured pictures or
playback images.
Steps
1. Go to Configuration → Device Configuration → Advanced Settings → System Service.
2. Check the debug information according to your needs.
Enable Algorithm POS Information Debug
The algorithm POS information will be overlaid on the playback image when you play back
the video with the dedicated tool.
Enable Positioning Frame Debug
The positioning frames of vehicle bodies and license plates will be overlaid on the captured
pictures.
3. Click Save.

12.8.2 Set Capture Filtering

Set the capture filtering information. The filtered conditions will not be captured.
Steps
1. Go to Configuration → Device Configuration → Advanced Settings → Vehicle Capture and
Recognition Service.
2. Check the conditions to be filtered.
Not Capture No Plate Vehicle
The vehicles without license plates will not be captured.
Filter Checkpoint Capture of Same Vehicle
62