Set Image Encoding Parameters - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual
Driver's/Passenger's Face Picture Matting
Select the driver's or passenger's face picture to be detected.
Overlay Frame on Matting
Check it to overlay frame on the matted picture.
Face Close-up Picture Cutting Ratio
Select the cutting ratio of the face close-up picture to be small, middle, or large.
Face Close-up Picture Ratio
Adjust the zooming ratio of the face close-up picture.
Matting Contrast Enhancement
Check it to enable the function and set the level. The higher the level is, the stronger the
contrast between the matting and the overlaid picture will be.
Close-up Picture Output Mode
Overlay on Picture
The driver's face close-up picture will be overlaid on the upper right corner of the picture,
and the passenger's face close-up picture will be overlaid on the upper left corner of the
picture.
Upload Arm
The face close-up pictures will be uploaded to the arming host or listening host.
Overlay and Upload Arm
The face close-up pictures will both be overlaid on the pictures and uploaded to the arming
host or listening host.
4. Click Save.
Result
If level 1 arming is set for the camera, the face close-up pictures will be uploaded to the level 1
arming device. If only level 2 arming is set for the camera, the face close-up pictures will both be
stored in the local storage and uploaded to the level 2 arming device.

4.3.9 Set Image Encoding Parameters

If the captured pictures are not clear, set the resolution of the captured pictures and the picture
size.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → Image Encoding.
26