Radar-Assisted Event Enforcement Traffic Camera User Manual
Steps
1. Click Radar.
2. Click Coordinate Calibration or GPS Calibration.
3. Set the radar calibration.
– Set coordinate calibration. Refer to Coordinate Mode and Auto Calibration Mode for details.
– Set GPS calibration. Refer to GPS Coordinate Calibration for details.
Note
The supported calibration modes vary with different models. The actual device prevails.
3.2.1 Coordinate Mode
Steps
1. Click Coordinate Calibration.
2. Select Calibration Mode as Coordinate Mode.
3. Select Calibration Point.
Figure 3-4 Coordinate Mode
10