Set Ddns; Set Ieee 802.1X - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual

8.3 Set DDNS

You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device
can be mapped to a domain name resolution server to realize the network access via domain
name.
Before You Start
● Register the domain name on the DDNS server.
● Set the LAN IP address, subnet mask, gateway, and DNS server parameters. Refer to "Set IP
Address" for details.
● Complete port mapping. The default port is 80, 8000, and 554.
Steps
1. Go to Configuration → Device Configuration → System → DDNS.
2. Check Enable DDNS.
3. Enter the server address and other information.
4. Click Save.
5. Access the device.
By Browsers
By Client Software

8.4 Set IEEE 802.1X

IEEE 802.1x is a port-based network access control. It enhances the security level of the
LAN/WLAN. When devices connect to the network with IEEE 802.1x standard, the authentication is
Figure 8-3 Set DDNS
Enter the domain name in the browser address bar to access the
device.
Add domain name to the client software. Refer to the client software
manual for specific adding methods.
49