Table of Contents
Advertisement
Thermal Optical Bi-spectrum Network Camera User Manual
3.1 Wireless Dial
The wireless network is provided with the mobile telecommunications technology via the 3G/4G
SIM card. For devices equipped with 3G/4G SIM card, the data stream of audio, video and image
can be transferred via 3G/4G wireless network.
Note
The wireless dial function may not be supported by some camera models.
●
Camera that supports wireless dial does not support PPPoE.
●
3.1.1 Set Wireless Dial
The built-in wireless module offers dial-up access to the Internet for the device.
Before You Start
Get a SIM card, and activate 3G/4G services. Insert the SIM card to the corresponding slot.
Steps
1. Go to Configuration → Network → Advanced Settings → Wireless Dial .
2. Check to enable the function.
3. Click Dial Parameters to configure and save the parameters.
4. Click Dial Plan. See Set Arming Schedule for detailed information.
5. Click Dial Status.
Click Refresh
Click Disconnect Disconnect the 3G/4G wireless network.
When the Dial Status turns to Connected, it means a successful dial.
6. Access the device via the IP Address of the computer in the network.
- Input the IP address in the browser to access the device.
- Add the device in client application. Select IP/Domain, and input IP address and other
parameters to access the device.
7. Optional: You can view 4G SIM card information and network carrier information in Auxiliary
Function.
Note
For certain device models working on Performance Mode or Proactive Mode, the wireless
mode can be upgraded. If necessary, please upgrade the wireless mode under the guidance of a
professional.
Chapter 3 Network Settings
Refresh the dial status.
5
Advertisement
Table of Contents
