Table of Contents
Advertisement
3.2.1 Set Camera Info
Customize specific information for the device. It may help identify a certain device when multiple
devices are under management.
Go Open Platform → General VCA Resource to set Camera No. and Camera Info.
3.3 Face Capture
Face capture function detects faces and captures pictures. When the grading of the detected face
exceeds an algorithm-defined value, the device captures the face and triggers linkage actions. Set
up rule and parameters before using the function.
Note
This function is only supported by certain device models.
●
To enable this function, you may need to select Face Capture on VCA Resource page. See
●
Allocate VCA Resource for details.
3.3.1 Set Auto Face Capture Rule
After setting the face capture rules and algorithm parameters, the device captures faces and
triggers linkage actions automatically.
Before You Start
Go to VCA → Select Application to select Face Capture, and click Next to enable the function.
Steps
1. Go to VCA → Set Application → Face Capture → Rule .
2. Check Enable.
3. Select a configuration mode.
Normal One detection scene is allowed to set. The device captures face in the scene in set
arming schedule.
See Normal Mode Settings for details.
Expert
The device can patrol among the detection scenes and capture face images.
Detection scenes and patrol schedule should be set in advance.
See Expert Mode Settings for details.
4. Click Save.
What to do next
Go to Playback → Picture to search and view the captured pictures.
Go to Application Display → Smart Display → Display Alarm to see currently captured face
pictures.
TandemVu PTZ Camera User Manual
9
Advertisement
Table of Contents
