Set Composite Picture Overlay - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual

4.3.6 Set Composite Picture Overlay

If you want to overlay information on the composite pictures, set composite picture overlay.
Steps
1. Go to Configuration → Device Configuration → Text Overlay → Composite Picture Overlay
Configuration.
2. Check Text Overlay on Capture.
3. Set the font size, color, overlay position, etc.
Percentage
It is the percentage that the overlaid information occupies on the picture. For example, if you
set the percentage to 50, the overlaid information in a row will occupy up to half of the image
width, and the excess content will be overlaid from a new line.
4. Select the overlay information from the list.
Note
The overlay information varies with different models. The actual device prevails.
5. Set the overlay information.
Set Type
Set Overlay
Information
Set Overlay Position
Set Space Number
Set Line Break
Characters
Figure 4-10 Set Composite Picture Overlay
You can edit the type.
For some information type, you can edit the detailed information.
If you check it, the current information will be displayed from a new
line.
Edit the number of space between the current information and the
next one from 0 to 255. 0 means there is no space.
Edit the number of characters from 0 to 100 between the current
information line and the previous information line. 0 means no line
break.
24