Search Picture - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual
3. You can do the following operations on this interface.
– Select the arming mode. Level 1 Arming can only connect one client or web. The uploaded
pictures will not be stored in the storage card. The pictures in the storage card will be
uploaded to the level 1 arming. Level 2 Arming can connect three clients or webs. The
pictures will be uploaded to the client/web, and stored in the storage card. Disarm is to
cancel the alarm status or real-time picture.
– Click Capture to enable manual capture. The captured pictures will be saved in the set local
path. Or you can click Open Folder to view the pictures.
– Click Measure Plate/Ruler On to measure the license plate pixel. After the measurement,
click Disable/Ruler Off.
– Click after Burst to set the burst parameters.
Pictures Per Burst
Up to five pictures can be captured per burst.
Burst Interval
Up to four intervals can be set, and the default interval is 100 s.
Click Burst, and the device will capture pictures according to the set intervals.

4.5 Search Picture

You can search the captured pictures stored in the storage card and export the pictures you need.
Before You Start
Install the storage card, and ensure the storage status is normal.
Figure 4-14 Real-Time Picture
28