Table of Contents
Advertisement
Radar-Assisted Event Enforcement Traffic Camera User Manual
2. Select License Plate Direction.
– Select Front LPR when license plates of vehicles from the approaching direction need to be
recognized.
– Select Rear LPR when license plates of vehicles from the leaving direction need to be
recognized.
3. Set Country/Region according to the actual needs.
4. Click Save.
4.3.3 Set Supplement Light Parameters
Supplement light can enhance the image stabilization and adjust the brightness and color
temperature. You can use supplement light to supplement light at night or when the light is dim.
Steps
Note
Functions and parameters vary with different models. The actual device prevails.
1. Go to Configuration → Device Configuration → Capture Parameters → Supplement Light
Parameters.
2. Select the I/O and set the supplement light parameters.
I/O Output Mode
Flash Light Mode
The flash light will be triggered by the signals and output high intensity illumination
instantaneously. The light can pass through the windshield and help to capture the details.
Figure 4-6 Set License Plate Recognition Parameters
Figure 4-7 Set Supplement Light Parameters
20
Advertisement
Table of Contents
