Table of Contents
Advertisement
Radar-Assisted Event Enforcement Traffic Camera User Manual
Server properly if needed.
4. Click Save.
8.2 Connect to ISUP Platform
ISUP (EHome) is a platform access protocol. The device can be remotely accessed via this platform.
Before You Start
● Create the device ID on ISUP platform.
● Ensure the device can communicate with the platform normally.
Steps
1. Go to Configuration → Device Configuration → System → ISUP Protocol.
2. Check Enable.
3. Select Protocol Version.
4. Enter Platform IP Address, Platform Port, and Camera No.
Note
The camera No. should be the same with the added one on the ISUP platform.
5. Optional: Enter Encryption Key if you select v5.0.
6. Click Save.
7. Optional: View Registration Status.
Note
When the registration status shows online, you can add or manage the device via the platform
software. Refer to its corresponding manual for details.
Figure 8-2 Connect to ISUP Platform
48
Advertisement
Table of Contents
