Table of Contents
Advertisement
Radar-Assisted Event Enforcement Traffic Camera User Manual
4. Select data upload mode.
Upload Real-Time Data
The vehicle detector will upload the collected data to the server in real time.
Upload Statistics Data
The vehicle detector will upload the collected data to the server according to the set interval.
5. Select Protocol Type.
Unicoil
One coil for each lane.
6. Enable POS information.
1) Check Enable POS Information.
2) Enter X-Coord. and Y-Coord. of the POS information overlaid on the live view image.
3) Check the POS information to overlay on the live view image.
7. Set the lane data collection parameters.
1) Click the lane No.
2) Check Enable POS of Lane to enable the POS information collection of the lane.
3) Enter Linked Lane No.
4) Select Lane Direction Type.
5) Select Flash Light Mode and Linkage Output.
6) Optional: Check lane(s) to copy the parameters of the current lane to other lane(s).
8. Draw lane lines and virtual coil areas.
1) Click Draw Area.
2) Select the lane.
Figure 4-3 Set Data Collection
17
Advertisement
Table of Contents
