Radar-Assisted Event Enforcement Traffic Camera User Manual
Adjust overlay
sequence
6. Click Save.
4.3.7 Set Vehicle Feature Parameters
Set vehicle feature parameters if you need to detect the vehicle features of the passing vehicle.
Steps
Note
The parameters vary with different models. The actual device prevails.
1. Go to Configuration → Device Configuration → Capture Parameters → Vehicle Feature
Parameters.
2. Check the vehicle features that needed to be detected, and set the corresponding parameters.
3. Click Save.
4.3.8 Set Face Picture Matting
You can enable driver's or passenger's face picture matting on the capture violation pictures and
set corresponding parameters.
Steps
Note
Some models do not support face picture matting. The actual device prevails.
1. Go to Configuration → Device Configuration → Capture Parameters → Vehicle Feature
Parameters.
2. Check Enable Face Picture Matting.
3. Set corresponding parameters.
Click
/
to adjust the display sequence of the overlay
information.
Figure 4-11 Set Face Picture Matting
25