Network Traffic Camera (for Traffic Flow Camera) User Manual
Chapter 2 Capture Configuration
2.1 Set Data Collection
You can set the vehicle data collection and analysis parameters.
Steps
1. Go to Configuration → Device Configuration → Application Mode → Trigger Mode .
2. Select Trigger Mode as Data Collection.
3. Select Linked Lane Amount.
4. Select data upload mode.
Upload Real-Time Data
The device will upload the collected data to the server in real time.
Upload Statistics Data
The device will upload the collected data to the server according to the set interval.
5. Select Protocol Type.
Unicoil
Figure 2-1 Set Data Collection
4