Set Picture Composition - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual
Effective Status
Select the effective status of the supplement light according to the actual condition.
High Level/Low Level
The effective status should stay different with the default status for I/O to take effect. And
the default status changes according to the selection of the effective status. If you set the
effective status as high level, the default level goes to low level.
Pulse
If you set the effective status as pulse, you can select the default status as high level or low
level. The selection of pulse is applicable to strobe light.
Output in Advance
It is the preact time [0 to 1000 μs] of the flash light, to ensure that the flash light is on when
capture is triggered.
Output Dwell Time
It is the dwell time [0 to 10000 μs] after the flash light responds. The actual flash light
supplement time is the result of the dwell time minus advanced time.
Supplement Light Mode
Select Checkpoint. The light compensation works on every vehicle.
3. Set the supplement light control mode.
– Check Control Supplement Light by Auto Brightness Detection when you want the
supplement light to be controlled by detecting the surroundings brightness automatically. Set
the brightness threshold. The higher the threshold is, the harder the supplement light can be
enabled.
– Check Enable Supplement Light by Time when you want the supplement light to be enabled
during a fixed time period. Set the start time and end time.
Note
Enabling supplement light by brightness and time are conflicted with each other. You can only
enable one function.
4. Optional: Select other IO(s) to copy the same settings.
5. Click Save.

4.3.4 Set Picture Composition

You can enable the picture composition to composite several pictures into one to make it
21