HIKVISION iDS-TCM403-B/0832 Configuration Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. iDS-TCM403-B/0832
  6. Configuration manual

HIKVISION iDS-TCM403-B/0832 Configuration Manual

Network traffic camera
Hide thumbs Also See for iDS-TCM403-B/0832:
Table of Contents

Advertisement

Quick Links

Network Traffic Camera
Configuration Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iDS-TCM403-B/0832 and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION iDS-TCM403-B/0832

Summary of Contents for HIKVISION iDS-TCM403-B/0832

  • Page 1 Network Traffic Camera Configuration Manual...
  • Page 2 With the philosophy of "Technology for the Good", Hikvision requests that every end user of video technology and video products shall comply with all the applicable laws and regulations, as well as ethical customs, aiming to jointly create a better community.
  • Page 3 Network Traffic Camera Configuration Manual control, selecting a suitable network environment (the Internet or Intranet) where video products are connected, establishing and constantly optimizing network security. Video products have made great contributions to the improvement of social security around the ●...
  • Page 4 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 5 Network Traffic Camera Configuration Manual DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
  • Page 6 Network Traffic Camera Configuration Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 7 Network Traffic Camera Configuration Manual Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
  • Page 8 Network Traffic Camera Configuration Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or...
  • Page 9 Network Traffic Camera Configuration Manual Safety Instruction Regulatory Information This is a class A product and may cause radio interference in which case the user may be required to take adequate measures. Laws and Regulations Use of the product must be in strict compliance with the local laws and regulations. Please shut down the device in prohibited area.
  • Page 10 Network Traffic Camera Configuration Manual DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature ● and humidity requirements, see device specification. No naked flame sources, such as lighted candles, should be placed on the equipment. ●...

  • Page 11: Table Of Contents

    Network Traffic Camera Configuration Manual Contents Chapter 1 Application Mode Configuration ................. 1 1.1 Set Checkpoint Capture ......................1 1.1.1 Set Checkpoint Single I/O ....................1 1.1.2 Set RS-485 Radar ......................4 1.1.3 Set Mixed-Traffic Lane ....................7 1.2 Set Intersection Violation System Capture ................10 1.3 Set Smart Monitoring Capture .....................
  • Page 12 Network Traffic Camera Configuration Manual 1.6.8 Set Vehicle Feature Parameters .................. 41 1.6.9 Set Image Encoding Parameters .................. 42 1.7 Set Barrier Gate Linkage ....................... 42 1.7.1 Set Allowlist and Blocklist ................... 43 1.7.2 Control Barrier Gate ....................44 1.7.3 Set Wiegand Parameters ..................... 45 Chapter 2 Radar Detection ......................

  • Page 13: Chapter 1 Application Mode Configuration

    Network Traffic Camera Configuration Manual Chapter 1 Application Mode Configuration Note The supported application modes vary with different models. The actual device prevails. ● If the application mode supports area drawing, you can check Display All Areas to display all the ●...
  • Page 14 Network Traffic Camera Configuration Manual Figure 1-1 Set Checkpoint Single I/O 3. Optional: Select the violation type(s) to be detected, and set the corresponding parameters. Refer to Set Violation and Incident Detection for details. 4. Check the corresponding External Input according to the connected I/O signal. Note Each input corresponds to one lane.
  • Page 15 Network Traffic Camera Configuration Manual Capture Interval Select Time, and set Interval (the time between the adjacent captures). Capture Pictures The number of captured picture(s). 8. Link supplement light(s) to the specific lane(s). Refer to Set Supplement Light Linkage for details. 9.

  • Page 16: Set Rs-485 Radar

    Network Traffic Camera Configuration Manual 1.1.2 Set RS-485 Radar Set RS-485 radar if RS-485 signal (speed detection or capture via radar) is connected, and capture is triggered by radar. In this mode, the information including the vehicle speed, vehicle passing time, vehicle overview, license plate number, license plate color, vehicle color, the facial features of the driver and the front passenger, etc.
  • Page 17 Network Traffic Camera Configuration Manual Figure 1-3 Set RS-485 Radar...
  • Page 18 Network Traffic Camera Configuration Manual 3. Optional: Select the violation type(s) to be detected, and set the corresponding parameters. Refer to Set Violation and Incident Detection for details. 4. Set the lane parameters. Refer to Set Linked Lane Parameters for details. 5.

  • Page 19: Set Mixed-Traffic Lane

    Network Traffic Camera Configuration Manual 11. Click Save. 1.1.3 Set Mixed-Traffic Lane Set mix-traffic lane if capture is triggered by virtual coils (video or radar detection). In this mode, the information including the vehicle speed, vehicle passing time, vehicle overview, license plate number, license plate color, vehicle color, the facial features of the driver and the front passenger, etc.
  • Page 20 Network Traffic Camera Configuration Manual Figure 1-5 Set Mixed-Traffic Lane...
  • Page 21 Network Traffic Camera Configuration Manual 3. Optional: Select the violation type(s) to be detected, and set the corresponding parameters. Refer to Set Violation and Incident Detection for details. 4. Set continuous capture parameters. Refer to Set Continuous Capture Parameters for details. 5.

  • Page 22: Set Intersection Violation System Capture

    Network Traffic Camera Configuration Manual Figure 1-6 Draw Lane Line 12. Click Save. 1.2 Set Intersection Violation System Capture Set video analysis intersection violation system if capture is triggered by virtual coils. In this mode, the information including the violation information, vehicle passing time, vehicle overview, license plate number, license plate color, vehicle color, etc.
  • Page 23 Network Traffic Camera Configuration Manual Figure 1-7 Set Intersection Violation System Capture...
  • Page 24 Network Traffic Camera Configuration Manual 3. Optional: Select the violation type(s) to be detected, and set the corresponding parameters. Refer to Set Violation and Incident Detection for details. 4. Set continuous capture parameters. Refer to Set Continuous Capture Parameters for details. 5.

  • Page 25: Set Smart Monitoring Capture

    Network Traffic Camera Configuration Manual Figure 1-8 Draw Lane Line 13. Click Save. 1.3 Set Smart Monitoring Capture The smart monitoring mode supports capturing motor vehicles, non-motor vehicles, and pedestrians via video triggering. Steps 1. Go to Configuration → Capture → Application Mode . 2.
  • Page 26 Network Traffic Camera Configuration Manual Figure 1-9 Set Smart Monitoring Capture 3. Set smart mode parameters. Refer to Set Scene Mode for details. 4. Set continuous capture parameters. Refer to Set Continuous Capture Parameters for details. 5. Set the lane parameters. Refer to Set Linked Lane Parameters for details. 6.

  • Page 27: Set License Plate Recognition System Capture

    Network Traffic Camera Configuration Manual Figure 1-10 Draw Lane Line 8. Click Save. 1.4 Set License Plate Recognition System Capture If you want to trigger capture of the passing vehicles and recognize the license plate numbers, set license plate recognition system capture. Steps 1.
  • Page 28 Network Traffic Camera Configuration Manual Figure 1-11 Set License Plate Recognition System 3. Select Trigger Type. Video Detection The passing vehicles will be recognized via videos. The capture mode is recommended as Strobe Light Mode. I/O Coil Select it when the device has been connected to I/O signal. Note The trigger types vary with different models.
  • Page 29 Network Traffic Camera Configuration Manual Capture is triggered according to the level signal status. If you select Falling Edge, the device will trigger capture at the moment that the high level falls to low level. If you select Rising Edge, the device will trigger capture at the moment that the low level rises to high level. Linked I/O No.

  • Page 30: Set Application Mode Detailed Parameters

    Network Traffic Camera Configuration Manual Figure 1-12 Draw Lane Line 8. Click Save. 1.5 Set Application Mode Detailed Parameters 1.5.1 Set Violation and Incident Detection The device supports different violation types detection. You can select the violation type(s) to be detected under different application modes, and set the corresponding parameters.
  • Page 31 Network Traffic Camera Configuration Manual Steps Note Not all the application modes support violation detection. ● The violation and incident detection types vary with different models. The actual device prevails. ● 1. Go to Configuration → Capture → Application Mode . 2.
  • Page 32 Network Traffic Camera Configuration Manual Violation Detection Description Type Note If Prohibition Violation is enabled, and Lane Type is set as Highway Emergency Lane, the violation of occupying emergency lane will be captured. Not Following The moving direction of the motor vehicle is not consistent with the Directional Sign guidance direction at the intersection.
  • Page 33 Network Traffic Camera Configuration Manual Violation Detection Description Type Enabling Red Light Delay Frame Due to the gotten traffic light status is not consistent with the actual status, the vehicles running when the light is yellow may be captured as running the red light. Set the delay frame, then the captured pictures of running the red light during the set frame will be regarded as invalid.

  • Page 34: Set Linked Lane Parameters

    Network Traffic Camera Configuration Manual Violation Detection Description Type When the number of pedestrians not yielded to reaches the set value, capture will be triggered. 1.5.2 Set Linked Lane Parameters You can set the properties and parameters of the linked lanes. Steps Note Not all the application modes support linked lane parameters settings.

  • Page 35: Set Continuous Capture Parameters

    Network Traffic Camera Configuration Manual 1.5.3 Set Continuous Capture Parameters Set continuous capture parameters to realize the continuous capture of the violation behaviors. Steps Note Not all the application modes support continuous capture parameters. ● The continuous capture parameters vary with different models. The actual device prevails. ●...

  • Page 36: Set Radar Parameters

    Network Traffic Camera Configuration Manual Steps Note Not all the application modes support scene mode settings. ● The scene mode parameters vary with different models. The actual device prevails. ● 1. Go to Configuration → Capture → Application Mode . 2.

  • Page 37: Set Violation Recording Parameters

    Network Traffic Camera Configuration Manual Steps Note Not all the application modes support radar parameters. ● The radar parameters vary with different models. The actual device prevails. ● 1. Go to Configuration → Capture → Application Mode . 2. Select Application Mode. 3.

  • Page 38: Set Supplement Light Linkage

    Network Traffic Camera Configuration Manual Steps Note Not all the application modes support violation recording. ● The violation recording parameters vary with different models. The actual device prevails. ● 1. Go to Configuration → Capture → Application Mode . 2. Select Application Mode. 3.

  • Page 39: Set Lane Speed Limit Parameters

    Network Traffic Camera Configuration Manual Note If LED supplement light is adopted, the recognition rate of the vehicle body color cannot be guaranteed at night. 5. Click Save. 1.5.8 Set Lane Speed Limit Parameters Set the speed limit parameters for different types of vehicles. Steps Note Not all the application modes support lane speed limit parameters.

  • Page 40: Set Traffic Light Detection Parameters

    Network Traffic Camera Configuration Manual Capture Speed When the speed of the vehicle on the lane (except the emergency lane) is lower than the set value, no capture will be triggered. 4. Click Save. 1.5.9 Set Traffic Light Detection Parameters Traffic light detection is supported for video analysis intersection violation system.

  • Page 41: Set Capture Parameters

    Network Traffic Camera Configuration Manual Traffic Light Color The color of the traffic light. Traffic Light Amount The number of the traffic light(s). Traffic Light Layout The arrangement of the traffic light(s). c. Click Zoom In to zoom in the live view image. d.
  • Page 42 Network Traffic Camera Configuration Manual Figure 1-14 Set Captured Image Parameters 2. Set the captured image parameters. Brightness It refers to the max. brightness of the image. Contrast It refers to the contrast of the image. Set it to adjust the levels and permeability of the image. Shutter If the shutter speed is quick, the details of the moving objects can be displayed better.

  • Page 43: Set License Plate Recognition Parameters

    Network Traffic Camera Configuration Manual 1.6.2 Set License Plate Recognition Parameters When there are vehicles of different types passing from different directions, set the license plate recognition parameters. Before You Start For some models, you need to select Application Mode as License Plate Recognition System. Steps Note The supported parameters vary with different models.
  • Page 44 Network Traffic Camera Configuration Manual 1. Go to Configuration → Capture → Capture Parameters → Supplement Light Parameters . Figure 1-16 Set Supplement Light Parameters 2. Select the I/O and set the supplement light parameters. I/O Output Mode Flash Light Mode The flash light will be triggered by the signals and output high intensity illumination instantaneously.

  • Page 45: Set Picture Composition

    Network Traffic Camera Configuration Manual The effective status should stay different with the default status for I/O to take effect. And the default status changes according to the selection of the effective status. If you set the effective status as high level, the default level goes to low level. Pulse When pulse signal is output to the supplement light, the light will flash.
  • Page 46 Network Traffic Camera Configuration Manual 1. Go to Configuration → Capture → Capture Parameters → Picture Encoding and Composition → Image Composition/Violation Picture Composition . Figure 1-17 Set Picture Composition 2. Check Enable Composition. 3. Set composition types for different picture quantities. 4.

  • Page 47: Set Information Overlay

    Network Traffic Camera Configuration Manual 1.6.5 Set Information Overlay Set Single Picture Overlay If you want to overlay information on the captured single pictures, set capture overlay. Steps Note The supported parameters vary with different models. The actual device prevails. 1.
  • Page 48 Network Traffic Camera Configuration Manual Check it to overlay license plate close-up pictures on the captured pictures. Overlay OSD on Close-up Picture Check it to overlay the OSD information on the close-up pictures. 5. Optional: Check the other channel(s) to copy the same settings. 6.
  • Page 49 Network Traffic Camera Configuration Manual Figure 1-19 Set Composite Picture Overlay 4. Set the font size, color, overlay position, etc. Percentage It is the percentage that the overlaid information occupies on the picture. For example, if you set the percentage to 50, the overlaid information in a row will occupy up to half of the image width, and the excess content will be overlaid from a new line.

  • Page 50: Set Body Picture Matting

    Network Traffic Camera Configuration Manual Adjust overlay Click to adjust the display sequence of the overlay sequence information. 8. Click Save. 1.6.6 Set Body Picture Matting Set body picture matting first if you need to upload body and vehicle pictures to the platform. Steps Note The function varies with different models.
  • Page 51 Network Traffic Camera Configuration Manual 1. Go to Configuration → Video → Traffic Light Enhancement . 2. Check Traffic Light Enhancement. Figure 1-21 Set Traffic Light Enhancement 3. Select Enhancement Mode. Note Select Smart Traffic Light Enhancement if the device supports this mode. 4.
  • Page 52 Network Traffic Camera Configuration Manual Figure 1-22 Sample 5) Optional: Select Light Shape. 6) Optional: Set Yellow Light Delay Time. 5. Set traffic light enhancement parameters according to the actual needs. Note Keep default settings if the device supports smart traffic light enhancement mode. Correction Level You can set different correction levels for different periods.

  • Page 53: Set Vehicle Feature Parameters

    Network Traffic Camera Configuration Manual Set Traffic Light Synchronization If you want to synchronize the shutter with the traffic light, enable the traffic light synchronization. Steps Note The function varies with different models. The actual device prevails. 1. Go to Configuration → Video → Camera Parameter → Power Synchronization . 2.

  • Page 54: Set Image Encoding Parameters

    Network Traffic Camera Configuration Manual Set Helmet Detection Sensitivity. It will capture when the amount of people who are not wearing helmets reaches the set value. If there are 2 or above people in the vehicle, it will not capture when the amount of people who are not wearing helmets is less than the set value.

  • Page 55: Set Allowlist And Blocklist

    Network Traffic Camera Configuration Manual Note Only the device supporting license plate recognition system supports barrier gate linkage. The actual device prevails. 1.7.1 Set Allowlist and Blocklist Set allowlist and blocklist if you want to control the passing vehicles at the entrance or exit via the barrier gate.

  • Page 56: Control Barrier Gate

    Network Traffic Camera Configuration Manual Delete Select the delete type, or enter the keywords. Click Delete to delete the lists of ● the same type. Select an item from the list, and click to delete the item. ● Click Delete All to delete all the lists. ●...

  • Page 57: Set Wiegand Parameters

    Network Traffic Camera Configuration Manual Note The supported number of relays varies with different models. Relay 1 corresponds to the 1A and 1B of the terminal. Relay 2 corresponds to the 2A and 2B of the terminal. 4. Set the barrier gate operation and alarm operation for the temporary vehicles, vehicles in the blocklist, and vehicles in the allowlist.

  • Page 58: Chapter 2 Radar Detection

    Network Traffic Camera Configuration Manual Chapter 2 Radar Detection Radar is used to detect the target and link the capture. Set radar detection parameters before capturing vehicle pictures. Before You Start Select the application mode as RS-485 Radar, and select Radar Type as Multi-Lane Radar. Steps Note The function varies with different models.
  • Page 59 Network Traffic Camera Configuration Manual Angle Deviation Set the angle compensation according to the target moving track detected by the radar. Horizontal Deviation Set the deviation between the radar construction position and the horizontal central position. The center of all the lanes is 0. Horizontal left deviation is a minus value, and horizontal right deviation is a positive value.
  • Page 60 Network Traffic Camera Configuration Manual The radar will adjust the angle deviation automatically according to the target track. 4. Uncheck Debug Mode to detect the vehicle speed. You can view the captured vehicle information such as the license plate color, license plate number, speed, and illegal type in real time.

  • Page 61: Chapter 3 View Real-Time Picture

    Network Traffic Camera Configuration Manual Chapter 3 View Real-Time Picture You can view the real-time captured pictures and license plate information. Steps 1. Go to Live View → Real-Time Capture . 2. Select an item from the list, and you can view the capture scene picture and license plate picture.
  • Page 62 Network Traffic Camera Configuration Manual Display the images in full screen mode. Capture All Open the saving path of captured pictures.

  • Page 63: Chapter 4 Search Picture

    Network Traffic Camera Configuration Manual Chapter 4 Search Picture You can search the captured pictures stored in the storage card and export the pictures you need. Before You Start Install the storage card, and ensure the storage status is normal. Steps 1.

  • Page 64: Chapter 5 View Traffic Statistics

    Network Traffic Camera Configuration Manual Chapter 5 View Traffic Statistics 5.1 View Real-Time Traffic Statistics You can view the real-time traffic statistics if the device supports this function. Steps 1. Go to Configuration → Capture → Advanced → Traffic Parameters → Traffic Parameters . 2.

  • Page 65: Chapter 6 View Traffic Light Status

    Network Traffic Camera Configuration Manual Chapter 6 View Traffic Light Status For the device supporting traffic light detection, you can go to Live View → Traffic Light Status to check real-time traffic light status after the traffic light detection mode is set.
  • Page 66 UD26003B...

This manual is also suitable for:

Ids-tcm403-b/0411Ids-tce907-br/1140Ids-tce507-br/1550Ids-tcm403-aIds-tce500-bIds-tcm403-ai

Table of Contents