HIKVISION iDS-TCS907-CIR User Manual page 65

Radar-Assisted Event Enforcement Traffic Camera User Manual
3. Set Baud Rate, Data Bit, Stop Bit, etc.
Note
The parameters should be same with those of the connected device.
4. Select Working Mode.
Console
Select it when you need to debug the device via RS-232 serial port.
Transparent Channel
Select it, and the network command can be transmitted to RS-232 control command via the
RS-232 serial port.
Narrow Band Transmission
Reserved.
5. Click Save.
Figure 9-2 Set RS-232
54