Interior - Sharp MX-M753 Operation Manual

INTERIOR

(16) (17)
(25)
(16) Duplex unit
Open this cover to remove a misfeed from the fusing unit
area.
(17) Fusing unit
Toner images are fused here.
Caution
The fusing unit is hot. Take care in removing misfed
paper.
(18) Cover of the duplex unit
Open when a misfeed has occurred in duplex unit.
*
(19) Toner cartridge
This holds toner for printing. The toner cartridge must be
replaced when indicated on the operation panel.
☞
REPLACING THE TONER CARTRIDGES
1-72)
(20) Main power switch
Keep this switch turned on when the fax option or
Internet fax option is installed.
☞
TURNING THE POWER ON AND OFF
(18)
(24) (23)
(page
(page 1-15)
1-5
BEFORE USING THE MACHINE
(19)(20)
(21) Right side cover
Open when a misfeed has occurred in the bypass tray or
large capacity tray.
(22) Upper cover of large capacity tray
Open when a misfeed has occurred in the large capacity
tray.
(23) Left side cover release
Push this knob up to open the left side cover.
(24) Left cover of paper drawer
Open this cover to remove paper misfed in tray 3 or tray
4.
(25) Photoconductive drum
Images are formed on the photoconductive drum.
Do not touch or damage the photoconductive drum.
(21)
(22)
Contents