Sharp MX-M753 Operation Manual page 99

Stapler
Allowed paper sizes for stapling
Maximum number of sheets for
*3
stapling
Punch module for finisher (3 trays)
Model
Hole punching
Allowed paper sizes for punching
Allowed paper weight for punching
Power supply
Dimensions
Weight
*1 Output capacity varies according to environmental conditions of the installation location, type of paper used, and the
condition of the machine.
*2 Offset and staple functions cannot be used.
*3 The number of sheets that can be stapled assumes a standard paper weight of 301 lbs. (80 g/m
consisting of two sheets of between 28 lbs. to 110 lbs. (106 g/m
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 8K, 16K, A3, B4, A4, A4R, B5 (There are four staple positions: 1 Staple
at Front, 1 Staple at Back, 2 Staples, and 1 Staple at Back (diagonal).)
100 sheets (8-1/2" x 11", 16K, A4, B5)
50 sheets (11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11"R, 8K, A3, B4, A4R)
MX-PN10B
3 holes or 2 holes
3 holes: 11" x 17", 8-1/2" x 11", A3, A4
2 holes: 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R,
A4R
2
15 lbs. to 32 lbs. (56 g/m to 128 g/m
Supplied from finisher
3-3/4" (W) x 28-9/64" (D) x 15-7/16" (H) (95 mm (W) x 715 mm (D) x 392 mm (H))
Approx. 8.6 lbs. (Approx. 3.9 kg)
1-58
BEFORE USING THE MACHINE
2
)
2 2
to 209 g/m .)
2
) with covers
Contents