Sharp MX-M753 Operation Manual page 670

[Color Mode] key
Touch the [Color Mode] key to open the color mode setting screen for Scan to HDD.
Color Mode
The following settings can be selected for the scanning color when the [START] key is pressed.
Mode
AUTO
Full Color
Grayscale
Mono 2
When you have finished selecting the mode, touch the [OK] key.
Scan to HDD/Color Mode
The machine automatically detects whether each original is color or black & white and switches
the mode appropriately (full color for a color original or black & white for a black & white original).
If color originals are mixed together with black & white originals, set the color mode to [Auto] to
have the color mode change appropriately for each original.
The original is scanned in full color. This mode is best for full color originals such as catalogues.
Even when the original is black and white, it is scanned as a full color original.
The colors in the original are scanned in black and white as shades of gray (grayscale).
Colors in the original are scanned as black or white. This mode is best for text-only originals.
[High Capacity Mode] or [Send Allowed Mode] can be selected as the storage format for Mono2.
High Capacity Mode:
When this mode is selected, the stored file cannot be transmitted.
Send Allowed Mode:
When this mode is selected, the stored file can be transmitted.
6-20
AUTO
Storage Format of Mono2
Full Color
High Capacity Mode
Grayscale
Send Allowed Mode
Mono2
Scanning method
DOCUMENT FILING
OK
Contents