Sharp MX-M753 Operation Manual page 698

Search
User Name
File or Folder Name
2
Password
(C) (B)(D)
User Name
6 12 18
Name 1
Name 3
Default User
Name 5
Direct Entry
Name 7
Name 9
Name 11
ABC
All
User
3
Cancel Start Search
(A)
Cancel OK
Name 2
Name 4
Name 6
Name 8
Name 10
Name 12
ABCD EFGH IJKL MNOP QRSTU VWXYZ
Touch the [User Name] key or the [File
or Folder Name] key.
If you know the user name, touch the [User Name] key and go
to "Using the user name to
If you know the file name, touch the [File or Folder Name] key
and go to "Using the file name or folder name to
3.
When "Display only the Files of Logged-in Users" is enabled
under System Settings (Administrator): Authority Group List
(Document Filing), the user name of the currently logged-in
user is selected and other user names cannot be selected.
Using the user name to search
There are four ways to select the user name:
(A) Touch the key of the user name.
The touched user name is highlighted.
1
If you accidentally select the wrong user name, touch the
2
key of the correct name.
(B) Touch the [Default User] key.
The user name can be selected from the factory stored
users.
(C) Touch the
etc.
An area for entering the "Registration No." [----] appears in
the message display. Enter the "Registration No." set
during user registration. This will allow you to select the
user name.
(D) Touch the [Direct Entry] key.
A text entry screen appears. Directly enter the user name.
Searching is possible even if you only enter the first several
letters of the user name.
After selecting the user name, touch the [OK] key.
After the user name is selected, the [Password] key can be
touched. To search for files of the selected user name that
have a certain password, touch the [Password] key and enter
the password.
(It is not possible to search using a password only.)
Using the file name or folder name to
search
Enter the file name or folder name in the text entry screen that
appears and touch the [OK] key.
6-48
DOCUMENT FILING
search" in step 3.
search" in step
key.
Contents