Interior - Sharp MX-M905 User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

INTERIOR

(1) The main power switch
Use this switch to turn on the power for the machine.
When using the fax or Internet fax functions, always keep
this switch in the " " position.
► TURNING ON THE POWER (page 1-10)
(2) Toner cartridge
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new
one.
► REPLACEMENT OF TONER CARTRIDGE (page
1-161)
(3) Paper reversing section cover
This unit is used for reversing paper when 2-sided printing
is performed. Open this cover to remove a paper misfeed.
(4) Fusing unit
Heat is applied here to fuse the transferred image onto
the paper.
The fusing unit is hot. Take care not to burn yourself
when removing a misfeed.
(1)
(3) (4)
(2)
(5) (6)
(5) Transfer belt
This belt takes the image formed with toner off the
photoconductive unit and transfers the image onto paper.
Do not touch or damage the transfer belt.
This may cause a defective image.
(6) Waste toner bottle
This bottle collects excess toner that is produced during
printing.
► REPLACING THE WASTE TONER BOTTLE (page
1-163)
A service technician collects replaced waste toner
bottles.
1-6