Sharp MX-M753 Operation Manual page 458

Fax/Special Modes
Program
3
Timer
Job
Build
Original
Count
Press the [START] key.
Scanning begins.
When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key.
4
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
• To erase shadows caused by the binding of a book or other bound document, use the erase function. (Note, however, that
"Center Erase" and "Edge + Center Erase" cannot be used.)
• When the scan size of the original is specified by numerical values, this function cannot be used.
To cancel Dual Page Scan...
Touch the [Dual Page Scan] key in the screen of step 3 so that it is not highlighted.
(2) (3)
OK
Dual Page
Erase
Scan
1
2in1 Card Shot 2
Slow Scan
Mixed Size
Original Mode
File Quick File
).
Select Dual Page Scan.
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the [Dual Page Scan] key so that it is
highlighted.
(3) Touch the [OK] key.
4-77
FACSIMILE
(page 4-70)
Contents