Sharp MX-M753 Operation Manual page 131

4
5
If your computer and the machine are connected to the same local area network, you can click the [Search] button to
search for the machine. The machine's URL will appear. Select the URL and click the [OK] button. You will return to
the above screen and the machine's URL will be automatically entered.
Perform steps 5 through 12 on page 1-87 to continue the installation.
6
This completes the installation.
• After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE
MACHINE" (page 1-98) to configure the printer driver settings.
• If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER
UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See
1-104).
BEFORE USING THE MACHINE
If a proxy server is used, specify the
proxy server and click the [Next] button.
To specify a proxy server, select [Print via the proxy server] and
then enter the [Address] and [Port number].
Enter the machine's URL and click the
[Next] button.
Enter the URL in the following format:
Normal format:
http://<the machine's domain name or IP address>:631*
*1 Normally "631" should be entered for the port number. If the
IPP port number has been changed on the machine, enter
the new port number.
When SSL is used:
https://< the machine's domain name or IP address>:<port number*
*2 Normally the port number and the colon ":" immediately
preceding the port number can be omitted. If the IPP port
number for SSL has been changed on the machine, enter
the new port number.
"INSTALLING THE PS DISPLAY
1-90
1
/ipp
2
>/ipp
FONTS" (page
Contents