Sharp MX-M753 Operation Manual page 50

(9) [START] key
Press this key to copy or scan an original. This key is also
used to send a fax in fax mode.
(10) [LOGOUT] key ( )
Press this key to log out after you have logged in and
used the machine. When using the fax function, this key
can also be pressed to send tone signals on a pulse dial
line.
☞
USER AUTHENTICATION
(11) [#/P] key ( )
When using the copy function, press this key to use a job
program. When using the fax function, this key can be
used when dialing.
(12) [CLEAR ALL] key (
Press this key to return to the initial operation state.
Use this key when you wish to cancel all settings that
have been selected and start operation from the initial
state.
JOB STATUS PRINT
READY
DATA
SYSTEM
SETTINGS IMAGE SEND
LINE
DATA
HOME
(page 1-17)
)
BEFORE USING THE MACHINE
LOGOUT
(10) (11) (12) (13)
(13) [STOP] key (
Press this key to stop a copy job or scanning of an
original.
(14) [POWER SAVE] key (
Use this key to put the machine into auto power shut-off
mode to save energy.
The [POWER SAVE] key (
is in auto power shut-off mode.
☞
[POWER SAVE] KEY
(15) [POWER] key (
Use this key to turn the machine power on and off.
☞
TURNING THE POWER ON AND OFF
(16) Main power indicator
This lights up when the machine's main power switch is
in the "on" position.
☞
TURNING THE POWER ON AND OFF
1-9
(9)
(14) (15) (16)
)
) / indicator
) blinks when the machine
(page 1-16)
)
(page 1-15)
(page 1-15)
Contents