Changing The Paper Size In Paper Tray 4 - Sharp MX-M753 Operation Manual

3
Gently push the tray in and set the paper type to tabbed paper.
4
☞
7. SYSTEM SETTINGS
Loading transparency film
Be sure to load transparency film oriented vertically. (Transparency film cannot be used in tray 4.)

CHANGING THE PAPER SIZE IN PAPER TRAY 4

Plain paper from 11" x 17" to 7-1/4" x 10-1/2"R size (A3 to B5) can be loaded in tray 4. For paper that can be used, see
"Types of paper that can be used in each
The procedures for loading paper in tray 4 and changing the paper size are the same as for tray 3 (see page 1-32).
When referring to the explanations of tray 3, keep in mind that special papers such as tabbed paper and transparency film
cannot be used in tray 4. Use tray 3 for special paper.
"Paper Tray Settings" (page 7-13)
tray" on page 1-28.
1-35
BEFORE USING THE MACHINE
Place the tabbed paper in the tray.
Place the tabbed paper with the print side face up.
[Example]
Make sure that the positions of the tabs correspond with the
originals as shown below.
Original
1st page 2nd page 3rd page 4th page
Tabbed paper
Front side
1st page
2nd page
3rd page 4th page
Contents