BEFORE USING THE MACHINE
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1)
Saddle stitch finisher (MX-FN16)
Output device that enables the use of the staple function
and offset function.
☞
FINISHER AND SADDLE STITCH FINISHER
*
Finisher (MX-FN15)
Output device that enables use of the staple function,
offset function and pamphlet copy function.
☞
FINISHER AND SADDLE STITCH FINISHER
*
Finisher (3 trays)
Output device that enables use of the staple function for
up to 100 sheets (8-1/2" x 11" size paper).
☞
FINISHER (3 TRAYS)
(2)
Punch module (AR-PN4B)
Punches holes in copies and other output.
Requires finisher (MX-FN15) or saddle stitch finisher
(MX-FN16).
☞
FINISHER AND SADDLE STITCH FINISHER
*
(3)
Inserter (MX-CF10)
Paper set in an inserter can be inserted into output as
covers or inserts. The inserter can be used to staple
output and punch holes manually.
☞
INSERTER
(page 1-61)
(1)
(2)
*
(page 1-50)
(page 1-50)
(page 1-56)
*
(page 1-50)
BEFORE USING THE MACHINE
(3)
(4)
(5) (6)
(4)
Automatic document feeder
This automatically feeds and scans multiple sheet
originals. Both sides of two-sided originals can be
scanned at once.
☞
PLACING THE ORIGINAL
(5)
Front cover
Open to replace toner cartridge.
☞
TURNING THE POWER ON AND OFF
☞
REPLACING THE TONER CARTRIDGES
(6)
Operation panel
This is used to select functions and enter the number of
copies.
☞
OPERATION PANEL
(7)
Center tray
Finished sheets are deposited here.
(8)
Bypass tray
Special papers (including transparency film) and copy
paper can be fed from the bypass tray.
☞
LOADING PAPER IN THE BYPASS TRAY
1-3
(7)
(8)
(page 1-44)
(page 1-15)
(page 1-72)
(page 1-8)
(page 1-42)
Contents