Sharp MX-M753 Operation Manual page 196

Stapling positions
Saddle stitch (only with
saddle stitch finisher)
*1 When the top left corner or the bottom left corner of the paper is stapled in one place, the staple is placed diagonally, except in the
following cases (Diagonal stapling):
• When the top left corner of the paper is stapled in one place when using the following paper sizes: 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, and A4R.
*2 Two sheets (one sheet when pamphlet stapling is performed) of paper up to 68 lbs. (256 g/m
is done, the number of sheets that can be used is two less (one less for saddle stitch) than the stated maximum.
• The number of sheets that can be stapled at once includes any covers and/or inserts that are inserted.
• When Mixed Size Original in the special modes is used with the "Same Width" setting, the maximum number of sheets that
can be stapled is 25 for a saddle stitch finisher or 30 for a finisher regardless of the paper size.
• The saddle stitch function can only be used when a saddle stitch finisher is installed.
Vertically-oriented paper
Saddle stitch cannot be used
when the paper is oriented
vertically
2-36
Horizontally-oriented paper
Applicable paper sizes
8-1/2" x 11"R, A3, B4, A4R, 8K
Number of sheets that can be stapled:
2
Max. 30 sheets*
2
) can be stapled as covers. When this
Contents
COPIER