Checking The Image To Be Transmitted (Preview) - Sharp MX-M753 Operation Manual

CHECKING THE IMAGE TO BE
TRANSMITTED (Preview)
If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before
sending the image.
* The factory default setting is disabled.
Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch
panel.
Place the original.
1
Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the program.
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
Send Settings
Resolution
File Format
2 Address Review
Color Mode
File
Special Modes
Quick File
Preview
Select transmission settings and touch the [START] key.
3
"Originals are being read" appears while the originals are being scanned, and when scanning is finished, the preview screen
appears on the touch panel. Transmission will not take place until you touch the [Start Sending] key in the preview screen.
Preview
4
System settings (administrator): Default Preview
You can specify whether or not the [Preview] key function will be enabled in the base screens of the image send modes and
in the address book.
Fax USB Mem. Scan PC Scan
Scan: Auto Send: Auto
8½x11
Auto Text
200X200dpi
PDF PDF
Mono2
B/W
Function Rev.
Display Rotation
Start
Sending
0001 /0010
Touch the [Preview] key to highlight it.
Check the preview image and then touch
the [Start Sending] key.
Transmission begins.
For information on the preview screen, see
SCREEN" (page 5-70).
5-69
SCANNER/INTERNET FAX
"PREVIEW CHECK
Contents