Changing The Paper Size In Paper Tray 1 - Tray 2 - Sharp MX-M753 Operation Manual

Loading paper in paper tray 1/tray 2 is now complete.
5
CHANGING THE PAPER SIZE IN PAPER TRAY 1 -
TRAY 2
To change the paper size of tray 1 - tray 2, follow the steps below.
This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading
paper, see "LOADING PAPER IN PAPER TRAY 1 - TRAY
1
Hook
• Do not place heavy objects on the tray or press down on the tray.
• Before changing the paper size of tray 1, raise the paper guide.
(A)
LT
A4
2
• When attaching the paper size guide, make sure that the top and bottom of the guide are aligned to the same paper
size.
• If the top and bottom of the paper size guide are not aligned to the same paper size, skewed feeding and misfeeds
will result.
3
Tray 1
Tray 2
Paper guide
(B)
A4
LT
1-31
BEFORE USING THE MACHINE
2" (page 1-30).
Remove the paper size guide.
With the base of the tray pressed all the way down, hold down
the hook at the bottom on the paper size guide and pull the
paper size guide up slightly.
Adjust the paper size guide to the paper
size to be used.
Paper sizes are inscribed at the slot (A) on the bottom of the
tray and at the hole (B) at the top of the paper size guide. ("LT"
indicates 8-1/2" x 11" size.)
Align the bottom of the paper size guide with the slot, and align
the hole at the top with the locking tab.
Push in the paper guide so that it locks
into place.
Push the paper size guide in until the hook at the bottom locks
into place. (You will hear a "click" when the hook locks.) Move
the paper size guide slightly to verify that it has locked into
place.
Contents