Pcl Settings - Sharp MX-M753 Operation Manual

Item
Output
Quick File
*1 When a saddle stitch finisher or finisher is installed. ("Finisher Middle Tray" can only be selected when the finisher (3
trays) is attached.)
*2 This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is
normally no need to change this setting. When "0" is selected, all lines are printed at a width of 1 dot.
*3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function
may not take effect with some print methods.)
*4 Only effective when printing PDF, JPEG, and TIFF files.

PCL Settings

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Item
PCL Symbol Set Setting
PCL Font Setting
PCL Line Feed Code
Wide A4
• (Use Print per Unit)
• (Do not use Print per Unit)
1
• Staple Position* : None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
• (Do not use Punch)
• (Use Punch)
• (Disabled)
• (Enabled)
Description
Specify the symbol set used for
printing.
Use this to select the font used for
printing.
This setting is used to select how
the printer responds when a line
feed command is received.
When this is enabled, 80
characters per line can be printed
on A4 size paper using a 10-pitch
font. (When this setting is
disabled, up to 78 characters can
be printed per line.)
7-25
SYSTEM SETTINGS
Selections
Selections
Select from 35 items.
• Internal Font
• Extended Font
(List of internal fonts when extended fonts are not
installed.)
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF
• (Enabled)
• (Disabled)
Contents