Sharp MX-M753 Operation Manual page 875

Problem
The inserter does not
operate.
Paper misfeed occurs
A paper misfeed
occurs when paper is
fed from the inserter.
A message appears
each time paper is
placed in the paper
tray of the inserter.
Point to check
Are any inserter covers open?
"Disabling of inserter" is enabled in the
administrator settings.
A paper misfeed message appears.
The [START] key light is not illuminated.
The paper is curled or damp.
Do the size and orientation of the loaded
paper match the paper size and
orientation set in "Setting the paper type
and paper size"?
Was the [SIZE SELECT] key touched
and the size and orientation of the paper
for the inserter set as explained in
"Setting the paper type and paper size"?
Close all covers.
Check with your administrator.
Check the administrator settings and disable "Disabling
of inserter".
Remove the misfed paper.
☞
"REMOVING
Make sure that the punch or staple key has been
selected on the operation panel of the inserter.
☞
1. BEFORE USING THE MACHINE
OPERATION OF THE
Do not use curled or folded paper. When the inserter is
not going to be used for a long time, remove the paper
from the inserter, place it in a bag so that it does not
absorb moisture, and store it in a cool and dark place.
Make sure paper size and orientation set in "Setting the
paper type and paper size" match the size and
orientation of the loaded paper.
To ensure that the correct paper (size and orientation) is
loaded in the inserter, the machine indicates the current
paper size setting each time paper is placed in the
paper tray.
8-56
TROUBLESHOOTING
Solution
MISFEEDS" (page 8-8)
"MANUAL
INSERTER" (page 1-63)
Contents