Sharp MX-M753 Operation Manual page 858

Problem
Transmission does
not take place.
An address cannot be
specified.
Mode cannot be
selected.
The received image
file cannot be opened.
Point to check
Does the image file exceed the e-mail
attachment limit set in the system
settings (administrator)?
Did the image file exceed the file
attachment size limit of your mail
server?
(When Scan to E-mail is used.)
Has the folder on the destination
computer been set as a shared folder so
that files can be sent to it?
(When using Scan to Network Folder.)
Is "IPsec Settings" enabled on the
machine?
(When using Scan to Network Folder.)
Did you place a long size original on the
document glass when it is scanned?
Did you place an original that is folded?
Have functions been disabled by the
administrator?
Does the viewer program used by the
recipient support the format of the
received image data?
Does a message appear prompting you
to enter your password?
Check with your administrator.
If your administrator has set a limit on the size of
transmitted files, a file that exceeds the limit cannot be
transmitted.
Reduce the size of the file attachment (reduce the
number of pages scanned).
The size of the file can also be reduced by scanning
using a lower resolution setting. Ask your mail server
administrator what the file size limit is for one e-mail
transmission.
If the destination folder is not configured as a
shared folder, select "share" in the folder
properties.
If the folder was moved or otherwise changed, the
"share" setting may have been canceled.
When "IPsec Settings" is enabled in the system settings
(administrator), scanning to a shared folder may not be
possible in some computer environments.
For information about "IPsec settings", consult your
adminstrator.
➞ System Settings (Administrator) > "Security Settings"
> "IPsec Settings"
Place originals in the document feeder tray of the
automatic document feeder.
A long size original cannot be scanned from the
document glass.
Following the instructions in the display, unfold the
original, place it in the automatic document feeder
again, and rescan.
If a folded original is placed in the automatic document
feeder, an error will occur and scanning will be canceled
when the actual original size is detected during
scanning.
Check with your administrator.
Some functions may have been disabled in the system
settings (administrator). Check with your administrator.
When user authentication is enabled, the functions that
you can use may be restricted in your user settings.
Use a software program that is capable of opening
the selected file type and compression mode.
The recipient may be able to open the file if you change
the file type and compression mode selected at the time
of transmission.
Ask the sender for the password, or have the image
sent again in a non-encrypted format.
The received file is an encrypted PDF file.
8-39
TROUBLESHOOTING
Solution
Contents