Adding The Date To Copies (Date); Set The Date Format - Sharp MX-M753 Operation Manual

ADDING THE DATE TO COPIES (Date)

The date can be printed on copies. The position of the date, format, and page (first page only or all pages) can be
selected.
Example: Printing APRIL 4, 2010 in the top right corner of the paper.
Touch the [Date] key in the stamp selection screen.
1
See steps 1 to 4 of "GENERAL PROCEDURE FOR USING
Stamp
Date
YYYY/MM/DD
MM/DD/YYYY
2
DD/MM/YYYY
MM DD, YYYY
(1)
Stamp
Date
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
MM DD, YYYY
3
• If you select a date that does not exist (such as Feb. 30), the [OK] key will be grayed out to prevent entry.
• Changing the date here will not change the date that is set in the machine using "Clock" in the system settings.
Cancel OK
First Page
APR/04/2010
Date Change
All Pages
(2)
Cancel
OK
First Page
APR/04/2010
Date Change
All Pages
APR/04/2010
STAMP" (page 2-86).

Set the date format.

(1) Touch the key that shows the desired date
format.
(2) If you selected [YYYY/MM/DD],
[MM/DD/YYYY], or [DD/MM/YYYY], touch the
[/], [.], [-], or [ ] key to select the separator.
Check the displayed date. If you need to
change the date, touch the [Date
Change] key.
Set the date that you wish to use and touch the [OK] key.
Stamp
Date Change
2010
As an alternative to touching the
directly touch the numeric value display key and change the
value with the numeric keys.
2-89
Year Month Day
04 04
keys, you can also
Contents
COPIER
OK