Sharp MX-M753 Operation Manual page 190

Original
Custom Size
X15½ Y 8½
Recall
2
If you wish to edit or clear a previously stored key...
Touch the key that you want to edit or clear. The following screen will appear.
• To edit the key, touch the [Modify] key and go to the next step.
• To clear the key, touch the [Delete] key. Make sure that the original size has been cleared and touch the [OK] key.
Original
3
The stored original size will be retained even if the main power is turned off.
To cancel the operation...
Press the [CLEAR ALL] key (
OK
OK
Store/Delete
(2) (1)
A custom size has already been stored
in this location.
(1), (2) (3)
Cancel OK
17
X
(1~17)
inch
11
Y
(1~11 5/8)
inch
).
Store the original size.
(1) Touch the [Store/Delete] tab.
(2) Touch a key for storing a custom original
size.
Touch a key that does not show a size (
Cancel Delete Modify
Enter the original size.
(1) Enter the X (horizontal) dimension of the
original.
With the [X] key highlighted, enter the X (horizontal)
dimension of the original with the
dimension from 1" to 17" (25 mm to 432 mm) can be
entered.
(2) Enter the Y (vertical) dimension of the
original.
Touch the [Y] key and enter the Y (vertical) dimension of
the original with the
11-5/8" (25 mm to 297 mm) can be entered.
(3) Touch the [OK] key.
2-30
COPIER
).
keys. A
keys. A dimension from 1" to
Contents