Erasing Peripheral Shadows On The Image (Erase) - Sharp MX-M753 Operation Manual

ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases
the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.)
Scanning a thick book
Shadows appear here
Erase modes
Edge Erase
• Shadows at the edges of the original can also be erased when the automatic document feeder is used.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Specify the destination.
☞
ENTERING DESTINATIONS
2
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
3
(2) Touch the [Special Modes] key.
(3) Touch the [Erase] key.
☞
SPECIAL MODES
Center Erase
(page 5-18)
(page 5-71)
Not using the erase
function
Shadows appear in the
image.
Edge + Center Erase
5-75
SCANNER/INTERNET FAX
Using the erase
function
No shadows appear.
Side Erase
Contents