Interior - Sharp DX-2500N Operation Manual

INTERIOR

(15) Toner cartridges
These contain toner for printing. When the toner runs out
in a cartridge, the cartridge of the colour that ran out must
be replaced.
+
REPLACING THE TONER CARTRIDGES
(16) Fusing unit
Heat is applied here to fuse the transferred image onto
the paper.
Caution
The fusing unit is hot. Take care not to burn yourself
when removing a paper misfeed.
(17) Transfer belt
During full colour printing, the toner images of each of the
four colours on each of the photoconductive drums are
combined together on the transfer belt. During black and
white printing, only the black toner image is transferred
onto the transfer belt.
Do not touch or damage the transfer belt. This may
cause a defective image.
(18) Right side cover
Open this cover to remove a misfeed.
(19) Paper reversing section cover
This is used when 2-sided printing is performed. Open
this cover to remove a paper misfeed.
(20) Bypass tray
Use this tray to feed paper manually.
When loading a large sheet of paper, be sure to pull out
the bypass tray extension.
+
LOADING PAPER IN THE BYPASS TRAY
(15)
(21) (22)
(page 1-66)
(page 1-37)
BEFORE USING THE MACHINE
(16) (17)
(23) (24) (25) (26) (27)
(21) Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.
+
TURNING THE POWER ON AND OFF
(22) Toner collection container
This collects excess toner that remains after printing.
+
REPLACING THE TONER COLLECTION
CONTAINER
Your service technician will collect the Toner collection
container.
(23) Toner collection container release lever
Move this lever when you need to release the toner
collection container lock to replace the toner collection
container or clean the laser unit.
+
CLEANING THE LASER UNIT
+
REPLACING THE TONER COLLECTION
CONTAINER
(24) Handle
Pull this out and grasp it when moving the machine.
(25) Right cover of paper drawer
(when a paper drawer is installed)
Open this to remove a paper misfeed in tray 2, tray 3 or
tray 4.
(26) Paper tray right side cover
Open this to remove a paper misfeed in tray 1.
(27) Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to
open the right side cover.
1-5
(18) (19) (20)
(page 1-69)
(page 1-62)
(page 1-69)
Contents
(page 1-15)