Storage Management; To Select The File - Rigol DG900 Pro Series User Manual

Storage Management

15
Storage Management
You can store the screen capture or self-defined sequence waveforms to the internal
memory or external storage device. This series provides a USB HOST interface on the
front panel used to connect the USB storage device for external storage. The local
directory is "Local Disk (C)" and the external storage device is displayed as "USB Disk
(D)".
You can access the "Store" menu in the following ways.
• Click or tap Store/Recall at the bottom of the interface to enter the "Store"
menu.
• Press the front-panel
15.1

To Select the File

You need to select the desired file/folder(s) before any further operation.
1. Select the Disk
By default, the menu displays the content of "Local Disk(C)". You can switch to the
external storage device in the drop-down menu at the upper-left side of the menu.
For example, after "USB Disk(D)" is selected, the menu will display the content of
the external storage device-D disk.
TIP
Before using the external storage device, please make sure that the USB storage device
(FAT32, NTFS or exFAT format) is properly connected.
2. Enter the Target Directory
Click or tap the folder to enter the target directory.
3. Select the File/Folder
Tick the check box next to the file or folder and the box will be displayed as
You can click or tap the box again to cancel the selection. The check box restores
to its original state.
TIP
You can also tick the icon at the upper-right side of the menu to select all the files and
folders under the current directory. Click or tap
DG900 Pro User Guide
94
key to enter the "Store" menu.
again to cancel the select-all operation.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
.