Replace M Ent O F Cranksha Ft Rear Oil Seal - Toyota 1C Repair Manual

EM -84
ENGINE MEC H A NICAL - Cylinde r Block
N321
2 . REPLACE MENT OF Oil PUMP SEA L
If
the oil pump wa s r em ove d f rom th e cy li nder bl oc k :
(al Us ing a screwdriver, pry off the oil seal.
(bl Apply
MP grease to a new oil seal.
{c)
Using a socket wrenc h and hammer, drive in a new
oi l seal to the depth of
1
mm
(0.04
inJ from the oil
pump body edge.
If t he o il pu m p was not removed from t he cyli n der
block:
(a) Using a knife, cut off the oil seal lip.
(b) Using a screwdriver, pry off the oil seal.
CAU TIO N : Ta p the screw driver t ip an d b e care ful not
to damage the drive shaft.
(c) Apply
MP
grease to a new oil seal.
(d) Using a socket wrench and hamme r, drive in
a
new
oil seal to the depth of 1 mm
(0.04
in.I from the oil
pump body edge .
3. REPLACE M ENT O F CRANKSHA FT REAR OIL SEAL
If the rear oi l seal retaine r was re m ove d fr om t he
cylinder block:
(a) Using a screwdriver and hammer, drive out the oil
seal.