Idler Pulley - Toyota 1C Repair Manual

ENGINE MECHANICAL Timing Belt
EM -3 5
(cl
After turning the crankshaft insure that each pulley
aligns with the marks as shown
If the marks do not align, repeat the above procedure from
step 7. ·
(d)
Remove the crankshaft pulley boll
10. TORQUE NO. 1
IDLER PULLEY
Torque: 375 kg-c m 127 ft-lb, 37 N·ml
CAUTION: While tightening the pulley bolt, do not
move the idler pulley bracket.
11. INSTALL FAN BRACKET (FR Vehicles) OR RH ENGINE
MOUNTING BRACKET (FF Vehic l es)
Torque:
14 mm bolt head 375 kg -c m (27 ft -lb , 37 N·ml
17 mm bolt head 650 kg-cm (47 ft-lb, 64 N·ml
NOTE: If the vehicle has
a
PS
pump . do not install the
1 7
mm bolts .
12 . INSTALL BELT GUIDE AND NO . 1 TIMING BELT
COVER
(al Place the belt guide on the crankshaft timing pulley,
facing the cup side outward.
lb) Install No. 1 tim ing belt cover and gasket with the five
bolts.