Toyota 1C Repair Manual page 40

. EM -34
ENGINE MECHANICAL Timing Belt
lb) Place the timing belt to the injection pump drive
pulley while holding the pulley stationary with
a
wrench..
CAUTION: Be sure the timing belt Is securely
meshed and not loose.
(c)
Place the timing belt to the water pump pulley and
crankshaft timing pulley.
CAUTION: Be sure the timing belt is securely
meshed and not
loose.
(di Place the timing belt
to
the No. 2 idler pulley and oil
pump drive pulley.
CAUTION: Be sure the belt is not twisted or too
tight.
(el
Using a screwdrivet", install the tension spring.
CAUTION :
• Do not pinch the tension spring wit h pliers or such.
• Loosen the No.
1
Idler pulley bolt to where the id le
pulley lightly moves with tension spring force.
9. CHECK VALVE TIMING
(a) Temporarily install the crankshaft pulley bolt
lb) Turn the crankshaft two revolutions to where the line
mark of the camshaft pulley and the upper surface of
the cylindet" head are again aligned.
CAUTION: Always turn the cranksha ft clockwise.
It turned counte rclockwise, there ls possibility of the
belt teeth becoming unmeshed and the belt tension
changing.