Chapter 8: Upgrade Kits; Boss-N1 Module Kit - Dell PowerEdge R960 Installation And Service Manual

The table lists the available After Point Of Sale [APOS] kits.
Table 88. Upgrade kits
Kits
Bezel
M.2 NVMe SSD
BOSS-N1
GPU
Drives
Memory
PERC
Network cards (Standard PCIe adapter
LP/FH)
Network cards (OCP)
PCIe SSD card
Power cords
Power supplies
Quick sync
TPM
Processor enablement thermal kits
Serial COM port
Cables
Heat sink
Risers
Rail
Cable Management Arm (CMA)
Topics:
•

BOSS-N1 module kit

• Serial COM port kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 NVMe SSDs.
Before you begin the installation or removal process, follow the
instructions.
Related links to service instructions
See Installing the front bezel
See Installing the M.2 NVMe SSD module
See Installing the BOSS-N1 controller card module
See GPU and also see the document included with the GPU cable kit.
See Installing the drive
See Installing a memory module
See Installing the rear mounting front PERC module
See Installing the LOM card and rear I/O board
See Installing the OCP card
See Installing the drive
Offered, but without special service instructions
See Installing a power supply unit
Offered, but without special service instructions
See Upgrading the Trusted Platform Module
See Installing the processor
See Installing the serial COM port
Offered, but without special service instructions
See Installing a processor heat sink module
Not available as APOS kits, upgrades offered only with the "Basic Deployment
Upgrade of Dell Server" service.
Offered, but without special service instructions
Offered, but without special service instructions
safety guidelines
Upgrade Kits
and before working inside the system
Upgrade Kits
8
205