Dell PowerEdge R960 Installation And Service Manual page 101

Figure 64. Configuration 5: 16 x 2.5-inch SAS/SATA + 8 x 2.5-inch NVMe with fPERC 12
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 71. 16 x 2.5-inch SAS/SATA + 8 x 2.5-inch NVMe with fPERC 12
Order
1
2
3
4
5
6
7
8
9
10
11
From
SL14_CPU4_PA2 (signal connector on PEM)
SL17_CPU3_PA4 (signal connector on PEM)
CTRL_SRC_SB1_PB1 (fPERC controller connector) BP_DST_SA1 (backplane signal connector)
SL1_CPU2_PA1 (signal connector on system
board)
SL2_CPU2_PB1 (signal connector on system
board)
CTRL_SRC_SA1_PA1 (fPERC controller connector) BP_DST_SA1 (backplane signal connector)
SIG_PWR_1 (system board power connector)
SL3_CPU2_PA2 (signal connector on system
board)
SIG_PWR_2 (system board power connector)
SIG_PWR_3 (system board power connector)
SL6_CPU1_PA4 (signal connector on system
board)
To
DST_PA1 (backplane signal connector)
DST_PB1 (backplane signal connector)
CTRL_DST_PA1 (fPERC input connector)
CTRL_DST_PB1 (fPERC input connector)
BP_PWR_1 (backplane power connector)
DST_PA1 (backplane signal connector)
BP_PWR_1 (backplane power connector)
BP_PWR_1 (backplane power connector)
DST_PB2 (backplane power connector)
Installing and removing system components 101