Table of Contents
Advertisement
Figure 45. Installing the riser air shroud
Next steps
1.
Install the expansion card risers
2. IF removed,
install the air shroud
3.
Install the cooling fan cage
4.
Install the air shroud top
5.
Install the support
bar.
6. Follow the procedure listed in
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
or
install the full length expansion card
assembly.
cover.
After working inside your
Safety
instructions.
bezel.
riser.
system.
Installing and removing system components
85
Advertisement
Table of Contents
