The table lists the available After Point Of Sale [APOS] kits.
Table 77. Upgrade kits
Kits
Bezel
M.2 NVMe SSD
BOSS-N1
GPU
Hard drives SSD
Memory
Network cards (Standard PCIe adapter
LP/FH)
Network cards (OCP)
PCIe SSD card
Power cords
Power supplies
Quick sync
TPM
Processor enablement thermal kits
Internal USB 3.0 card
Serial COM port daughter card
Cables
Heat sink
Risers
Rail
CMA
Topics:
•
BOSS-N1 module kit
•
GPU kit
•
Internal USB card kit
•
Serial COM port kit
•
VGA port kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 SSDs.
Related links to service instructions
See :
Installing the front bezel
See :
Installing the M.2 SSD module
See :
Installing the BOSS-N1 module
See :
GPU kit
See :
Installing the drive into the drive carrier
See :
Installing a memory module
See :
Installing the LOM card and rear I/O board
See :
Installing the OCP card
See :
Installing the drive carrier
Offered, but without special service instructions
See :
Installing a power supply unit
Offered, but without special service instructions
See :
Upgrading the Trusted Platform Module
See :
Installing the processor
See :
Installing the internal USB card
See :
Installing the serial COM port
Offered, but without special service instructions
See :
Installing the processor and heat sink module
See :
Installing the expansion card risers
Offered, but without special service instructions
Offered, but without special service instructions
NOTE:
CMA is not supported in Direct Liquid Cooling configuration.
Upgrade Kits
Upgrade Kits
8
181