Installing The Processor And Heat Sink Module - Dell PowerEdge R960 Installation And Service Manual

Figure 131. Installing the heat sink onto the processor
Next steps
1. Install the processor heat sink
2. If removed, install the
3. If removed, Install the full length expansion
NOTE: Before installing the full length expansion card risers, install the GPU air shroud.
4. Install the air shroud or
5. Install the cooling fan cage
6. Install the air shroud top
7. Install the support bar.
8. Follow the procedure listed in

Installing the processor and heat sink module

Prerequisites
Never remove the heat sink from a processor unless you intend to replace the processor or heat sink. The heat sink is necessary
to maintain proper thermal conditions.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the support bar.
4. Remove the air shroud top
5. Remove the cooling fan cage
6. Remove the air shroud
NOTE: The GPU air shroud can be removed only after the full length expansion card risers have been removed.
7. If installed, Remove the full length expansion card
module.
PEM.
risers.
install the GPU air shroud.
assembly.
cover.
After working inside your
Safety
Before working inside your
cover.
assembly.
or remove the GPU air shroud.
system.
instructions.
system.
risers.
Installing and removing system components 159