Removing The Gpu Air Shroud - Dell PowerEdge R960 Installation And Service Manual

Figure 41. Installing the air shroud
Next steps
1. Install the cooling fan cage
2. Install the air shroud top
3. Install the support bar.
4. Follow the procedure listed in

Removing the GPU air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the support bar.
4. Remove the air shroud top
5. Remove the cooling fan cage
6. Remove the full length expansion card
CAUTION: The full length expansion card risers must be removed before removing the GPU air shroud.
Steps
Press the latches on either sides of the GPU air shroud, and lift the GPU air shroud out of the system.
assembly.
cover.
After working inside your
Safety instructions.
Before working inside your
cover.
assembly.
risers.
system.
system.
Installing and removing system components 81