Dell PowerEdge R960 Installation And Service Manual page 52

Table 48. HTTP Device n Settings details (continued)
Option
URI
TLS Authentication
Configuration
Table 49. ISCSI Device1 Settings screen details
Option
Connection 1
Connection 2
Connection 1 Settings
Connection 2 Settings
Connection Order
Table 50. TLS Authentication Configuration screen details
Option
TLS Authentication Mode
Root Certificate Configuration
Table 51. NVMe-oF SubSystem Settings screen details
Option
NVMe-oF SubSystem n (n = 1 to 4)
NVMe-oF SubSystem n Settings (n = 1
to 4)
Table 52. NVMe-oF SubSystem n Settings
Option
Interface
Transport Type
Protocol
VLAN
VLAN Id
VLAN Priority
Retry Count
Timeout
52 Pre-operating system management applications
Description
Obtain URI from the DHCP server if not specified
Specifies the option for TLS authentication configuration.
Description
Enables or disables the ISCSI connection. This option is set to Disabled by default.
Enables or disables the ISCSI connection. This option is set to Disabled by default.
Enables you to control the configuration for the ISCSI connection.
Enables you to control the configuration for the ISCSI connection.
Enables you to control the order for which the ISCSI connections will be
attempted.
Description
View or modify the device's boot TLS Authentication Mode. This option is set to One
Way by default. None means the HTTP server and the client will not authenticate each
other for this boot.
Import, delete, or export the root certificate.
Description
Enables or disables NVMe-oF SubSystem. This option is set to Disabled by
default.
Enables you to control the configuration of the NVMe-oF SubSystem, if Enabled.
Description
NIC interface used for NVMe-oF connections. This option is set to Embedded
NIC 1 Port 1 Partition 1 by default.
This field sets the value of transport type for NVMe-oF connection. This option is
set to TCP by default.
This field sets the value of protocol type for NVMe-oF connection. This option is
set to IPv4 by default.
Enables or disables VLAN for this NVMe-oF connections. This option is set to
Disabled by default.
Specifies the VLAN Id for this NVMe-oF connection. This option is set to 1 by
default.
Specifies the VLAN priority for this NVMe-oF connection. This option is set to 0 by
default.
Specifies the retry count for this NVMe-oF connection. This option is set to 3 by
default.
Specifies the timeout for this NVMe-oF connection. This option is set to 10000 by
default.