Chapter 8: Upgrade Kits; Boss-N1 Module Kit - Dell PowerEdge R6615 Installation And Service Manual

The table lists the available After Point Of Sale [APOS] kits.
Table 91. Upgrade kits
Kits
Bezel
M.2 SSD
BOSS-N1
Drives
Memory
Network cards (Standard PCIe adapter
LP/FH)
Network cards (OCP)
PCIe SSD card
Power cords
Power supplies
Quick sync
TPM
Processor enablement thermal kits
Internal USB 3.0 card
Serial COM port daughter card
VGA port for Direct Liquid Cooling system See
Cables
Fans
Heat sink
Risers
Rail
CMA
Topics:
•

BOSS-N1 module kit

• Data Processing Unit (DPU) kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 SSDs.
NOTE: To enable the BOSS-N1 module in the system, ensure that the BIOS firmware version is 1.5.5 and iDRAC firmware
version is 4.30.30.30 or later.
Related links to service instructions
See Installing the front bezel
See Installing the M.2 SSD module
See Installing the BOSS-N1 controller card module
See Installing the drive
See Installing a memory module
See Installing the LOM card and rear I/O board
See Installing the OCP card
See Installing the drive
N/A
See Installing a power supply unit
N/A
See Upgrading the Trusted Platform Module
See Installing the processor
See Internal USB card kit
See Installing the serial COM port
Installing the VGA port
N/A
See Installing a fan
See Installing a processor heat sink module
See Installing the expansion riser
N/A
N/A
Upgrade Kits
or Direct Liquid Cooling Module
Upgrade Kits
8
175