Optional Boss-N1 Module; Removing The Boss-N1 Module Blank; Installing The Boss-N1 Module Blank - Dell PowerEdge R960 Installation And Service Manual

3. Install the air shroud or
4. Install the cooling fan cage
5. Install the air shroud top
6. Install the support bar.
7. Follow the procedure listed in

Optional BOSS-N1 module

Removing the BOSS-N1 module blank

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
Use a screwdriver to push out the blank from the BOSS-N1 module bay.
Figure 142. Removing the BOSS-N1 module blank
Next steps
1. Replace the BOSS-N1 module blank

Installing the BOSS-N1 module blank

Prerequisites
Follow the safety guidelines listed in the
Steps
Align the blank with the BOSS-N1 module bay and push it into the bay until it clicks into place.
install the GPU air shroud.
assembly.
cover.
After working inside your
Safety instructions.
Before working inside your
or install BOSS-N1
Safety instructions.
system.
system.
module.
Installing and removing system components 169